Adjustable Vienna 337 Series Wall Mount Hinge

Catalogue Number: V1E337 (An adjustable close V1E037)

Glass Fabrication: Cut-Out Required in Glass, See Template in product images.

Includes: Gaskets, Screws, and Glass Fabrication Dimensions.

Backplate: Central back-plate, Wall to Glass Hinge.

Deduction: 8 mm from glass width.

Two hinges: will hold up to 50 kg with a maximum door width of 914 mm.

Three hinges: will hold up to 63 kg with a maximum door width of 914 mm.

Glass Thickness: 10 mm to 12 mm Toughened Safety Glass.

Construction: Solid brass with all moving parts (pins and springs) in stainless steel.

Hinge Swings: 90 Degree in and 90 Degree Out at factory set position.

Closing Type: Self-Centring when within 15 Degree of closed position at factory set position.

Special Feature: Adjustable to Any Angle Up to 90 Degrees without Having to Take Door Down.

 

The Adjustable Vienna Series has taken our popular Vienna Hinge to a new level. Adjustment to accommodate the desired angle (up to 90 degrees) is done after the door is hung. Simply loosen the Allen set screws and turn the door to the desired closed position. By merely tightening the Allen screws your door will self-centre to the desired closed position. The door can swing 90 degrees inward and 90 degrees outward (adjusting angle from factory set position will reduce 90 degree swing in that direction). For doors pulling outwards only (using a clear door jamb), you can adjust the hinge to close 5 degrees inside the shower area, thus having the door close snugly against the jamb.