Adjustable Geneva 344 Offset Wall Mount Hinge with Finish selector

Catalogue Number: GEN344 (An adjustable close version the offset hinge GEN044)

Deduction: 8 mm from glass width to achieve the same width / coverage.

Glass Fabrication: Cut-Out Required in Glass, See Template in product images.

Includes: Gaskets, Screws, and Glass Fabrication Dimensions.

Back plate: Offset back-plate, Wall to Glass Hinge.

Two hinges: Up to 36 kg, with a max door width of 711 mm.

Three hinges: Up to 54 kg, with a max door width of 813 mm.

Glass Thickness: 8 mm to 12 mm Toughened Safety Glass.

Construction: Solid brass with all moving parts (pins and springs) in stainless steel.

Hinge Swings: 90 Degree in and 90 Degree Out at factory set position.

Closing Type: Self-Centring when within 15 Degree of closed position at factory set position.

Special Feature: Adjustable to any angle Up to 90 Degrees without Removing Door. Once the door is hung, simply loosen the Allen set screws and turn the door to the desired closed position. By merely tightening the Allen screws your door will self-centre to the desired closing position. The door can swing 90 degree inward and 90 degree outward (adjusting angle from factory set position will reduce 90 degree swing in that direction). For doors pulling outwards only (using a clear door jamb), you can adjust the hinge to close 5 degree inside the shower area, thus having the door close snugly against the jamb.